As long as you're able to stay within the 6-- lbs - 1,000 lbs tongue weight rating for the 10K Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET it will work great for your application!
If you end up needing to upgrade you just need the replacement head and spring bars for the 12K system:
- 12K Head Unit # EQ90-02-1200
- 12K Spring Arms # EQ90-01-1299 view full answer...
The Master Cylinder for Model 10 and 20 Actuators # DX66FR has 3/8-inch mounting holes spaced apart on centers by 3-7/16-inches. I measured this item myself in our warehouse. view full answer...
The Reese 5th Wheel Trailer Hitch # RP30047 that you referenced weighs 108 lbs. As long as you are capable of lifting that much weight you'd have no problem. A lot of people will install and remove lighter weight fifth wheel hitches like this by themselves. view full answer...
I went and pulled a Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G to measure the dimensions of the mounting holes and found that the two round holes are 5-3/4 inches apart, the slotted holes are also 5-3/4 inches apart, but the round holes to the center of the slotted holes is 6 inches apart. view full answer...
The total operation travel of the Air Lift Ride Control Air Helper Springs, Rear Axle # AL59565 is about 7 inches. I spoke with my contact at Air Lift and she confirmed that the maximum compression of the airbag is 3.1 inches and the maximum extension is 10.25 inches, so the travel is 7.15 inches.
The airbag needs between 6-1/2 inches and 8-1/2 inches of space to be mounted.
My contact at Air Lift mentioned that if you plan on doing any off-roading, a limiting strap will help protect... view full answer...
To add a gooseneck hitch to your 2021 GMC Sierra 1500 Denali, I recommend the B&W Turnoverball Underbed Gooseneck Hitch item # BWGNRK1019. It fits all three bed lengths and the diesel models. This system includes custom fit brackets that bolt into existing holes in your Sierra's frame. The only drilling you will need to do is in the bed when you add the holes for the receiver and the safety chains.
Please note that if you have the CarbonPro box you can not install a gooseneck hitch. None... view full answer...
For the Replacement TruXedo Tapered Weather Seal for Lo Pro QT Tonneau Covers # TX1114731 sold by the foot the thicker side goes up. view full answer...
Yes, it does. The Curt Front Mounted Hitch item # C22NR does fit a 2022 GMC Sierra 1500. This hitch is custom fit and bolts to your truck with included hardware. This hitch has a 2" receiver, a 500 lbs vertical load limit, and a 5,000 lbs towing capacity.
I have linked the installation instructions below. view full answer...
The dimensions of the Swagman Bike Cover for RVs - 2 Bikes # S24FR are 84" long x 67" tall x 58" wide. Your 2021 GMC Sierra 1500 has an approximate width of 81". However, the Swagman Bike Cover is only recommended for the use behind a RV, because the RV protects the bike bag. To use behind a truck the wind may eventually damage the bag but if the truck has a camper shell it could provide the protection needed. view full answer...
Hitch locks do not have towing capacities, including the Curt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitches - Stainless Steel # C23519.
Reason is because locks (and pins & clips) do not bear weight in the same manner as hitches or ball mounts, for example. So you just need to follow the capacity of the hitch or ball mount (whichever is lower). view full answer...
The towing capacities for a hitch can't be exceeded safely. So using your example if you have a trailer that weighs 10,000 lbs but the tongue weight is over 1,000 lbs you wouldn't be safe. To put it another way Cliff, you have to be under both towing capacities. view full answer...
The distance from the top of the bed rail on your 2016 GMC Sierra 1500 to the top of the crossbar on the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000948 is right around 26-1/2". I have attached a photo that shows this measurement for you as well. Generally speaking, most ladder racks are designed to sit just above the cab to allow for elongated items to be hauled with the rack/truck.
The best thing about this ladder rack aside for the fact that it is made of a lightweight... view full answer...
The slots in the Boat Trailer Roller Bunk Bracket, part # DL21762 are 7-1/4 inches long so you will be able to use that length to move the brackets where you need them on your trailer frame.
Here are the dimensions of the brackets you may find helpful. I have also included a photo of the bracket you can check out.
10-3/4 Inches Overall length
3 Inches Overall Width
2-3/4 Inches Inside Width
7-1/4 Inches Slot Length
7/16 Inch Slot width
3 Inches from Top of Bracket to the Start of the... view full answer...
This is a really good question. So our weight distribution manufacturers have explained it to us like this. The weight distribution system essentially becomes a part of the vehicle's hitch so it's weight does not get factored in as additional tongue weight.
Typically when a WD system is being used and there is quite a bit of bounce the issue is that the system is rated too high for the trailer's tongue weight. Or the system isn't setup properly. I'd verify the loaded tongue weight of your... view full answer...
The Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX5467-CVR measures 97" long by 62-3/4" wide. It is the correct replacement tarp for the TruXedo model number TX546701 cover. view full answer...
Yes, it does. I checked with Draw-Tite and I can confirm that the Draw-Tite Front Mount Trailer Hitch item # DT44HR does fit the 2023 GMC Sierra 1500 AT4 with the 3.0 diesel engine. This front mount hitch is custom fit and bolts to your Sierra with included hardware. view full answer...
It sounds like you already have a 2" receiver, so the reason for wanting the Reese Hitch Box Extension, part # RP45292 is for the extension. Rather than trying to use an adapter to expand your 2" receiver to 2-1/2" (which we do not carry), I suggest going with an extender that is made for your 2" receiver.
I recommend another extender, part # ST18. This has an 18" extension with a gross tongue weight of 350 pounds and maximum towing capacity of 3500 pounds. Of course, that can be increased... view full answer...
The Air Lift Ride Control Air Helper Springs # AL59565 for your 2018 GMC Sierra 1500 Denali have a maximum 2,000lb support capacity. This means they are capable of providing up to 2,000lbs of support to your factory suspension. Do understand this will not increase your payload or tongue weight ratings, they only make it safer to tow. In regards to your exact question, No, these will not limit your towing capacity. The total trailer tow weight is dependent on your truck. view full answer...